Bubble Jet System Not Operating

What you might notice

• Bubble jets won’t turn on

• Bubble jets stop suddenly

• Bubble button doesn’t respond immediately

Why this happens

The bubble system has a built-in safety cooling cycle to protect the air pump.

Step-by-step: Quick reset

1. Turn off the spa using the control panel.

2. Unplug the spa from the mains.

3. Leave it unplugged for 10–15 minutes to allow the air pump to cool.

4. Plug the spa back in.

5. Press the Bubble button again.

Important to know

• The bubble system can run for about 20 minutes, then pauses for around 10 minutes — this is normal

• This pause protects the motor from overheating

If it still won’t work

• Try the reset again once more